Troubleshooting - Long Range Wireless
The PTLevel and 2.4GHz Internet
The PTLevel will only work on 2.4 GHz internet Why only 2.4 GHz? The PTLevel is designed to only use 2.4GHz with 20mhz signals because 2.4 GHz connections have the most coverage. 5 GHz signals are great for faster speeds; however, they have shorter ...
Monitoring small tanks
Our 10kPa sensors have an accuracy to 0.98mm. Our regular 100kPa sensors have an accuracy to 9.78mm Custom Orders: 10kpa Sensors Pressure Range: 0 to 10kpa. The pressure resolution on a 0 to 10 kPa sensor is 0.0096 kPa per bit, which is equivalent to ...
Tubing - All About PTLevel Air Tubing Long Range Wireless PTLevel
Specifications: pneumatic tubing material: ether-based polyurethane 5/32in (4mm) outside diameter 0.093in inside diameter UV stabilized (as of 2023) operating temperature -40 to +160F How Long is the Tubing? Each PTLevel (Long Range Wireless or Wired ...
PTDevices and 2.4GHz Internet
The PTLevel will only work with 2.4GHz internet. 2.4GHz Internet - Splitting your Starlink Internet First, the PTLevel will only work on 2.4GHz and 20mhz. 2.4GHz has a broader range than 5ghz which is why the 2.4GHz network was selected in the design ...
What the lights mean - troubleshooting
We've build in some easy features allowing you to know when your PTLevel is working as it should, and to help us troubleshoot your PTLevel if something isn't right. Head to the bottom of the article to see a variety of pictures, and then follow those ...
Transmitter Not Reporting - Troubleshooting Guidance
Getting the error message "Transmitter Not Reporting" can be frustrating, but we want to help! Below are some possible reasons and solutions you can try in order to get your Transmitter reporting again. 1. Batteries - If the Long Range Wireless ...
What happens when your internet or WiFi is not working
Since the PTLevel is designed for rural users, we understand that you also may have unpredictable internet, regular internet outages/downtime, power interruptions, etc. We have created this article to help you understand what your PTLevel is going to ...
Low or 0% Readings
So you may be getting constant low or 0% readings eh? There are a few reasons why this might be happening but we’ll start with a quick brief on how the PTLevel works. OPTIONAL VIDEOTo top HOW IT WORKSTo top The way that the PTLevel device works is ...
Online Connecting Taking Too Long (or not at all)
Do you see the “Great! Now we just wait.” message but have waited a long time already? TROUBLESHOOTING STEPSTo top The first question to ask is, did you connect your PTLevel receiver to your home WiFi? You must first connect your PTLevel to your ...
Linking a New Transmitter to Your Existing Receiver and/or Resetting Zero Pressure
To top If you have been sent a replacement Transmitter and need to link it to your existing Receiver, then this is for you. Finding Your PTLevel IP Address For Linking a new transmitter or resetting a new zero pressure reading, you will need your ...
Level Reading Maintenance - Long Range Wireless PTLevel
Now that you have your PTLevel setup, you’re probably wondering what to do over time in order to maintain the device and it’s readings. There’s really not much to do, but as with everything, a little bit of maintenance goes a long ways. Maintenance ...
Calibration Procedure and Sensor Accuracy
After you’ve installed your new device and setup the depth of your tank, you must calibrate the device in order to achieve a proper reading. This process is simple and is explained below. You can not calibrate at 0% or really low levels, and you must ...
Popular Articles
Level Reading Maintenance - Long Range Wireless PTLevel
Now that you have your PTLevel setup, you’re probably wondering what to do over time in order to maintain the device and it’s readings. There’s really not much to do, but as with everything, a little bit of maintenance goes a long ways. Maintenance ...
How Often Does the PTLevel Wireless Report Online?
The Wireless PTLevel is designed to be battery conscious and with that, it implements a special monitoring schedule. By default, it wakes up every 30 minutes to check the level. Then, if the level is out by approx. 10% since the last 30 minute check, ...
Wireless Device Installation Instructions
How to install the Long Range Wireless PTLevel device. These instructions are provided with the water level monitor that you purchase as well.
Calibration Procedure and Sensor Accuracy
After you’ve installed your new device and setup the depth of your tank, you must calibrate the device in order to achieve a proper reading. This process is simple and is explained below. You can not calibrate at 0% or really low levels, and you must ...
WIFI Connection Procedure
LET’S GET YOUR PTLEVEL CONNECTED To top Below are a couple of videos on how to connect your PTLevel receiver to your WiFi at home. You need to do this if you are setting it up for the first time or if you’ve changed your home password or network SSID ...