Troubleshooting - Wired WiFi
What do the Lights Mean - Wired WiFi troubleshooting
In the winter of 2023-2024, we launched the new Wired WiFi which has a button on the front, and no longer has a blue light. For information on the old Wired WiFi (which has 2 lights under the lid), please scroll to the bottom of the article for ...
Tubing - All About PTLevel Air Tubing Wired WiFi PTLevel
Specifications: pneumatic tubing material: ether-based polyurethane 5/32in (4mm) outside diameter 0.093in inside diameter UV stabilized (as of 2023) operating temperature -40 to +160F How Long is the Tubing? Each PTLevel (Long Range Wireless or Wired ...
The PTLevel and 2.4GHz Internet - Wired WiFi PTLevel
The PTLevel will only work on 2.4 GHz internet Why only 2.4 GHz? The PTLevel is designed to only use 2.4GHz signals with 20mhz because 2.4 GHz connections travel farther. 5 GHz signals are great for faster speeds; however, they have shorter range. We ...
Level Reading Maintenance
Now that you have your PTLevel setup, you’re probably wondering what to do over time in order to maintain the device and it’s readings. There’s really not much to do, but as with everything, a little bit of maintenance goes a long ways. MAINTENANCE ...
Low or 0% readings?
Are you getting constant low or 0% readings? There are a few reasons why this might be happening but we’ll start with a quick brief on how the PTLevel works. OPTIONAL VIDEOTo top HOW IT WORKSTo top The way that the PTLevel device works is that it ...
Popular Articles
How Often Does the PTLevel Wireless Report Online?
The Wireless PTLevel is designed to be battery conscious and with that, it implements a special monitoring schedule. By default, it wakes up every 30 minutes to check the level. Then, if the level is out by approx. 10% since the last 30 minute check, ...
Level Reading Maintenance - Long Range Wireless PTLevel
Now that you have your PTLevel setup, you’re probably wondering what to do over time in order to maintain the device and it’s readings. There’s really not much to do, but as with everything, a little bit of maintenance goes a long ways. Maintenance ...
Wireless Device Installation Instructions
How to install the Long Range Wireless PTLevel device. These instructions are provided with the water level monitor that you purchase as well.
Calibration Procedure and Sensor Accuracy
After you’ve installed your new device and setup the depth of your tank, you must calibrate the device in order to achieve a proper reading. This process is simple and is explained below. You can not calibrate at 0% or really low levels, and you must ...
WIFI Connection Procedure
LET’S GET YOUR PTLEVEL CONNECTED To top Below are a couple of videos on how to connect your PTLevel receiver to your WiFi at home. You need to do this if you are setting it up for the first time or if you’ve changed your home password or network SSID ...