Online Connecting Taking Too Long (or not at all)
TROUBLESHOOTING STEPS
To topThe first question to ask is, did you connect your PTLevel receiver to your home WiFi?
You must first connect your PTLevel to your home WiFi. Please see your product instructions or another connection article online to proceed with this step. Ensure your device is connected properly to your WiFi before troubleshooting further. Check this article on what the RX status lights mean to indicate a proper connection:
If you have, does that WiFi have an internet connection?
The network you’re using must have an internet connection for this device to work properly.
If there is an internet connection, why is it still not connecting?
If your WiFi has a first connect agreement, ie. it is a public access WiFi, our device will not be able to use the internet connection on your WiFi. You must allow the device on that network through the router or use a different internet connection. Another reason would be due to the router blocking any new device connections. Just refer to your router manual for details on how to allow a new device. If that still isn’t the case, contact us to troubleshoot further.
Related Articles
Level Reading Maintenance - Long Range Wireless PTLevel
Now that you have your PTLevel setup, you’re probably wondering what to do over time in order to maintain the device and it’s readings. There’s really not much to do, but as with everything, a little bit of maintenance goes a long ways. Maintenance ...Wireless Device Installation Instructions
This article is for downloading the Long Range Wireless PTLevel Instruction Manual. To learn the step-by-step process of installing the device in a cistern, with pictures, visit our PTLevel Cistern Setup Page: ...What is the amp hour rating for running the PTLevel Long Range Wireless for 24 hours?
You may want to run the PTLevel long range wireless on a solar system but how big of a system do you need to setup? Now, some big things to note is that the below numbers are based on the current default power setup. You can modify the power settings ...How Often Does the PTLevel Wireless Report Online?
The Wireless PTLevel is designed to be battery conscious and with that, it implements a special monitoring schedule. By default, it wakes up every 30 minutes to check the level. Then, if the level is out by approx. 10% since the last 30 minute check, ...WIFI Connection Procedure
LET’S GET YOUR PTLEVEL CONNECTED To top Below are a couple of videos on how to connect your PTLevel receiver to your WiFi at home. You need to do this if you are setting it up for the first time or if you’ve changed your home password or network SSID ...