Level Reading Maintenance - Old Ethernet Wired Device Discontinued
MAINTENANCE
Once every three months or seasonally we suggest that you pull the tubing and weight out of the tank. Let it drain and give it a quick inspection. If you have a clear tube, check to see if there is any water or moisture in it. If there is, please see this article: https://ptlevel.com/blog/kb/low-readings/. Then just simply drop the weight back into the tank.
Related Articles
Level Reading Maintenance - Long Range Wireless PTLevel
Now that you have your PTLevel setup, you’re probably wondering what to do over time in order to maintain the device and it’s readings. There’s really not much to do, but as with everything, a little bit of maintenance goes a long ways. Maintenance ...Installation Instructions for Wired PTLevel (Discontinued)
How to install the Wired PTLevel device. These instructions are provided with the water level monitor that you purchase as well.Level Reading Maintenance
Now that you have your PTLevel setup, you’re probably wondering what to do over time in order to maintain the device and it’s readings. There’s really not much to do, but as with everything, a little bit of maintenance goes a long ways. MAINTENANCE ...Wireless Device Installation Instructions
This article is for downloading the Long Range Wireless PTLevel Instruction Manual. You can download our English, French, and Spanish language instruction manuals below. To learn the step-by-step process of installing the device in a cistern, with ...Power Over Ethernet (POE) and the PTLevel Wired
We supply a POE adapter and Power supply with every Wired PTLevel sold. This adapter is installed on the router end of the Ethernet cable and powers the PTLevel so that you only have to run one cable that is used for communications and power. You ...