Temperature Probe Setup and Installation
Plug the temperature probe into the appropriate connector on the end of the PTDevice enclosure. Now with it plugged in, you can attach the stainless probe to the area that you
would like to monitor. This could be onto a pipe using zip ties, the side of a tank
using permanent tape, directly into the liquid, etc.
The temperature probe is water-proof and can be installed directly into liquid.
The temperature probe comes with 13' of cable
• Waterproof stainless steel probe
• -55°C to 125°C (-67°F to 257°F)
• ±0.5°C accuracy over the range of -10°C to 85°C
• 13 feet of supplied cable
• 6.4mm diameter by 50mm length probe
• 4mm cable diameter
• 15.5mm connector diameter
Can I add a Temperature Probe to my existing PTLevel?
Unfortunately a temperature probe can not be added as a feature after-the-fact. If you would like to order a PTLevel with a temperature sensor and already own a PTLevel, contact us directly to arrange a discount.
The Wired WiFi PTLevel and the Long Range Wireless PTlevel will both have a temperature probe version available for purchase soon on our website. Can't wait? Contact us directly to buy yours before anyone else can! We estimate them to be available in November on our website.