Can I use any Ethernet Cables with the PTLevel Wired?
Yes, you can use any Ethernet cable. We recommend that you use a bury rated cable for any exposure to the sun or the ground. Otherwise, anything will work!
Related Articles
Power Over Ethernet (POE) and the PTLevel Wired
We supply a POE adapter and Power supply with every Wired PTLevel sold. This adapter is installed on the router end of the Ethernet cable and powers the PTLevel so that you only have to run one cable that is used for communications and power. You ...
Installation Instructions for Wired PTLevel (Discontinued)
How to install the Wired PTLevel device. These instructions are provided with the water level monitor that you purchase as well.
Comfast Repeater Setup
In this article, we will go over how to setup a Comfast Wifi repeater used to wirelessly extend an Ethernet connection. Please note we no longer sell or provide Comfast Repeaters as our Long Range Wireless PTLevel can achieve up to 1km of range! If ...
Wired Device Not Connected
In this article, we will go over how to troubleshoot the PTLevel Wired device when it shows “Not Connected” in your account. TROUBLESHOOTING CONNECTIONSTo top Below are steps we suggest that you can go through to troubleshoot your device. Check your ...
PTLevel Cistern Setup
In this article, we will go over how to setup a Long Range Wireless PTLevel used to monitor water in a common cistern for household water use. The Long Range Wireless PTLevel can achieve up to 1km of range, comes with 13' of tubing, and the ...